當前位置: 首頁 > 綜合服務 > 質量承諾

校準和測試


為了幫助客戶獲得正常的設備性能表現,薩孚公司提供全面的校準和測試服務,這些服務內容符合適用的法規標準。  薩孚流體控制公司的設施和設備基準與適用的行業標準保持一致,提供如下服務:

  儀表和設備校準

壓力測試

真空測試 

密封泄漏測試

性能測試

產品完整性測試

 

Expertise and Scope of Service
Stockist and indentor of valves, flanges, fittings and related pipeline components. Our pre-vetted approved manufacturers provide assurance of quality which is further enhanced by our supply chain risk capability.

 

Quality Assurance System

A documented QA system is in place, operating in accordance with AS/ISO 9001. A copy of our QA manual is available on request. Quality Assurance Assessors: LRQA Business Assessors: LRQA, Business Assurance (Lloyds). We also operate the 5S continuous improvement system which is third party audited by Lloyds under our ISO 9001 management system.Occupational Health & Safety
SIT operates in accordance with the Occupational Health & Safety Act and specifically in accordance with AS 4801 (OHS AS 18001).

 

Certification
Certification is supplied in accordance with EN10204.3.1 (DIN 50049.3.1) on all products supplied.

  

QA REQUIREMENTS COVERED

Applicable quality assurance

Applicable manufacturers data sheets

In compliance with required standards and approvals

Fully guaranteed with warranty and full factory material and test certification

  
Available NDT   無損檢測
檢測說明
適用標準
測試范圍
燃料滲透 ASME V - Art. 6 and 24 10% on pressure containing
ASTM E165 parts for non magnetic materials
ANSI B16.34 - Annex D (100% upon customer request)

磁粉干濕度

(dry and wet)

ASME V - Art. 7 and 22 10% on pressure containing
ASTM E709 parts for magnetic materials
ANSI B16.34 - Annex C (100% upon customer request)
X射線和γ射線 ASME - V - Art. 2 and 22 Upon customer request
ASME VIII - Div 1 Upon customer request
ANSI B16.34 - Annex B
ASTM E142-E94 -E446-E186-E280
超聲波Ultrasonic ASME V - Art. 4 and 23
ASME VIII - Div 1
ASTM A388
靜液壓和氣壓
Hydrostatic and pneumatic
API 6D, API607 and API 6A
BS 5146 and 6755
MSS-SP61 or to customer specs

Stem torque

Visual and dimensional

API 6D and to customer requirements
Applicable ASTM Standards
MSS-SP 44 and SP55 100.00%
ANSI B16.34, B16.50, B16.10
API 6D and 6A, BS 2080

Alloy verification

Hardness

高壓氣體測試
High pressure gas tests

Texas analyser 9266
Nace MR01-75 100% of wetted components
customer specifications
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
   
 

質量控制項目

 

A. EXPEDITING AND SERVICES

SIT specialises in providing full service packs on your orders.

The following services are available:

expediting activities

 Global Sourcing
Global Supply

inspections at sub-contracting units

final testing witness inspections

certification review  

B. INSPECTION AND TESTING ACTIVITIES

 Thanks to the experience gathered during many years of activity in the supply of products to major Australian and off-shore companies, 
SIT can provide professional competence in the management of a third party survey, review and witness of any required non-destructive tests in Adelaide or ex overseas factory, such as:

X-Rays

Ultrasonic Tests

Magnetic Particle Inspection

Positive Material Identification (in-house facilities)

Dye Penetrant Liquid Inspection (in-house facilities)

  

As well as the following product tests:

pressure tests - pneumatic (in-house facilities)

pressure tests - hydraulic (in-house facilities)

pressure tests - gas high pressure tests (in-house facilities)

helium fugitive emission tests

  

Also functional tests for special applications:

low temperature tests

cryogenic tests

fugitive emission tests

functional test on actuated equipment (in-house facilities)

torque testing (in-house facilities)

 

The above activities usually require the use of special tools, equipment and qualified personnel normally provided by the manufacturer or by external qualified laboratories.

Upon request SIT can employ the services of independent and qualified institutes and laboratories to perform the inspection activities "on-site" or in neutral facilities. These survey and surveillance activities depend on collaboration with the manufacturer of the products to be supplied to Global Supply Line.

 

 

C. PROJECT INSPECTION ACTIVITIES

 For any of your orders, SIT can perform or arrange, with strict attention to detail, the following activities. All activities are kept under full control of professional, specialist staff.

 
ACTIVITY
STANDARD
UPON REQUEST

Preliminary check to verify that the supplier has put in production the

order according to the client's specifications, rules and parameters.

 

Follow up and expedite visits (on major projects) to verify that production

is underway and the suppliers comply with contractual delivery dates.

 
Final review, or witnessing of inspection activities to confirm the final supply stages.  
Certification review  

Witnessed inspection during NDT, performed by independent authorised

laboratories (UL, MPI, PMI, DPI, X-ray tests)

 

Witnessed inspection during special product/ equipment testing (low

pressure tests, helium tests, fugitive emission tests)

 
Dimensional checks  
Painting inspection  
Packing inspection
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
When required, all the above activities are recorded by Global Supply Line and duly reported to its clients with written and photographic reports.
The above services, usually agreed upon at the time of order, ensures the client that the quality of the product is assured at a fixed price, preventing delays in delivery that may be caused by late detection of any non-conformity. SIT selects its suppliers based on quality, liability and servicing.
 

PMI TESTING
Complete original factory test reports are supplied for all products in accordance with DIN EN10204.3.1 (50049.3.1). All material test reports are permanently maintained and always available through our MTR software. In addition to standard material testing performed at the manufacturing level, we maintain an advanced X-ray analyser providing the in-house ability to issue certificates of chemistry which increases customer confidence and allows for a high level of quality control.

SIT offer positive material identification if required for a small surcharge and with no delay. We have non destructive metallurgical X-ray testing capability for the following chemical elements : A105, WCB, LCB, LF2, LCC, WCC, CF8, CF8M, F51, F53, A20 and Monel.

All product is supplied with factory 50049 3.1 certificate, however should you require additional assurance that the body, bonnet, wedge/disc/ball and stem meets the required material specifications , in-house PMI testing can be done using the latest Bruker (S1 Sorter) testing device.

 
Copyright Right ? 2012-2013 sitsti.com Powered By Sit Inc
20选5中奖规则及奖金